Industrial valves and its applications

 Industrial valves are not only used in industry but also in residential and commercial buildings. The main task of industrial valves is flow control. This article is an overview of industrial valves and their types and applications. Join us and read this article.

A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll. Click here



Valves are mechanical devices that control the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids, gases, vapors, slurries, etc. Outside the home, industrial valves are built to control processes. Most utilities, from water to oil and gas, wouldn’t be able to function without heavy-duty, industrial-strength valves. So now that you know the importance of industrial valves, let’s get to know their different types, features, and usability. Follow this new blog in Linquip to find out more.

The general structure of industrial valves consists of the following parts:

  • Body
  • Valve Member
  • Seat
  • Stem
  • Bonnet
  • Actuator
  • Valve Trim
  • Stem Packing

Types of industrial valves

  • Strainer Valve
  • Electronic Expansion
  • Control Valves
  • PVC Foot Valves
  • Ball Valves
  • Plug Valves



Ball Valves

A ball valve is a form of quarter-turn valve which uses a hollow, perforated, and pivoting ball to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status. The shut position 1/4 turn could be in either CW or CCW direction. Read more



To read more about industrial valves, you can refer to the sources mentioned at the end of the article.


References:



Comments

Post a Comment

Popular posts from this blog

Introduction of electric motors and types

Image
  You've probably heard of electric motors by now. A critical piece in all electrical appliances. In this article, we will introduce electric motors in detail and examine its types, so stay tuned. An electric motor is a component that converts electrical energy into kinetic energy. Most electric motors are  electromagnetic -based. Most electric motors are rotary, but there are also linear motors. In a rotating motor, the moving part (usually inside the engine) is called the impeller or rotor, and the fixed position is called the station or stator. The motor consists of electric magnets wound on a frame. Although this frame is often referred to as armature, the term is often misused. Types of Electric Motor Electric motors may be classified by considerations such as power source type, internal construction, application and type of motion output. In addition to AC versus DC types, motors may be brushed or brushless, may be of various phase (see single-phase, two-phase, or three-...
Read more

Introduction and review of Suspension Insulators and Strain Insulators

Image
  In this article, we will have a detailed explanation and review of Suspension Insulators and Strain Insulators. Join us and read this article. First, we will introduce Suspension Insulators, and after reviewing it, we will submit Strain Insulators What is Suspension Insulators  ? The suspension type insulator consists of several insulation parts connected in series and forms a string. In suspension insulators, each porcelain discs is designed to work at 11 kV, and as the operating voltage increases, the number of discs in the string and in series increases as well. For example, the number of insulator discs required is 12 in 132 KV transmission lines.  Read More in Linquip What is Strain Insulators  ? According to  Wikipedia , A strain insulator is an electrical insulator designed to work in mechanical voltage (strain) to withstand the pull of a suspended electrical wire or cable. They are used in overhead electrical wiring to support radio...
Read more

Everything you should know about HVAC

Image
What is HVAC? What do you know about it? What is its use? In this article, we will take a closer look at HVAC, so join us to get the answers to these questions and any other questions about HVAC. The importance of HVAC Heating, ventilation, and air conditioning (HVAC) is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality. HVAC system design is a subdiscipline of  mechanical engineering , based on the principles of thermodynamics, fluid mechanics and heat transfer. As was mentioned earlier, an  HVAC system  is intended for thermal control of areas as well as comfort for occupants. Temperature is factor that affects the performance and health status of many systems. Take the case of a server room temperature as an example for which high temperature adversely affects the system’s reliability and operation of the servers is a great source of heat ge...
Read more