Everything you should know about Solar Batteries and Gas Turbine

Solar battery

Solar batteries convert energy from solar radiation into electrical energy. This process saves electricity. The solar battery can be recharged. Rechargeable batteries are produced in many different shapes and sizes, ranging from button cells to megawatt systems connected to stabilize an  electrical distribution network. Several different combinations of electrode materials and electrolytes are used, including lead–acid, zinc-air, nickel–cadmium (NiCd), nickel–metal hydride (NiMH), lithium-ion (Li-ion), and lithium-ion polymer (Li-ion polymer).

Knowing the right features of the best solar batteries enables you to choose the perfect one for your solar energy system. While evaluating the solar batteries, the essential things would be comparing battery’s power rating and capacity, its depth of discharge, warranty, and round-trip efficiency as well as the brand. click to read more information


Everything about Gas Turbine

A gas turbine is an internal combustion engine that runs on combustion energy. This device is mainly used in power plants, but it is also used in aircraft engines.

Gas turbine type can be considered as a highly important factor, for each type has its different applications. A gas turbine is a type of internal combustion engine. The engine can be considered as an energy conversion device as it converts energy stored in the fuel with beneficial mechanical energy into the shape of rotational power.

A gas turbine, also called a combustion turbine, is a type of continuous and internal combustion engine. The main elements common to all gas turbine engines are:

  • an upstream rotating gas compressor
  • a combustor
  • a downstream turbine on the same shaft as the compressor.

The SGT5-8000H was the very first air-cooled H-class gas turbine on the market. More than 750,000 fired hours of operational experience make it the most reliable and tested H-class gas turbine technology available today. With a power output of 450 MW in simple cycle, or 665 MW in combined cycle operation, and a combined cycle efficiency of 61%, it is among the most efficient and powerful gas turbines in commercial operation, with low operating and lifecycle costs. read more 


 

How do gas turbine parts go together?

By looking at a gas turbine, you can see the combustion section, one of the very important gas turbine parts, is between the compressor and the turbine flow direction. The fuel and the air are combined and burned in this way. Then, the hot exhaust passes the turbine and leaves the nozzle. We can consider two important roles performed by the nozzle. It is designed to make thrust by accelerating thrust generation via heat exhaust gas. Then the nozzle controls the engine’s mass flow.

The basic operation of the gas turbine is a Brayton cycle with air as the working fluid : atmospheric air flows through the compressor that brings it to higher pressure ; energy is then added by spraying fuel into the air and igniting it so that the combustion generates a high-temperature flow ; this high-temperature pressurized gas enters a turbine, producing a shaft work output in the process, used to drive the compressor. click here


Industrial Gearbox

Here we introduce and review the industrial gearbox and its applications.

A transmission is a machine in a power transmission system, which provides controlled application of the power. Often the term 5 speed transmission refers simply to the gearbox that uses gears and gear trains to provide speed and torque conversions from a rotating power source to another device.

An industrial gearbox is an enclosed system that transmits mechanical energy to a transmission unit. The system slows down the speed and torque of rotation. Industrial gearboxes are different from standard gearboxes, as the former needs a long, stable life and safety factor for most of the drives.

more information in this link: https://www.linquip.com/blog/general-equipments/industrial-gearbox/


The above article was a general summary of the introduction and review of some industrial parts. You can get complete information about this equipment and its applications by visiting the Linquip website. You can also refer to the anchor texts specified in the writing and references below.

Refrences:

https://www.linquip.com/blog/gas-turbine-type-applications/

https://new.siemens.com/

https://en.wikipedia.org/

 

Comments

Post a Comment

Popular posts from this blog

Introduction of electric motors and types

Image
  You've probably heard of electric motors by now. A critical piece in all electrical appliances. In this article, we will introduce electric motors in detail and examine its types, so stay tuned. An electric motor is a component that converts electrical energy into kinetic energy. Most electric motors are  electromagnetic -based. Most electric motors are rotary, but there are also linear motors. In a rotating motor, the moving part (usually inside the engine) is called the impeller or rotor, and the fixed position is called the station or stator. The motor consists of electric magnets wound on a frame. Although this frame is often referred to as armature, the term is often misused. Types of Electric Motor Electric motors may be classified by considerations such as power source type, internal construction, application and type of motion output. In addition to AC versus DC types, motors may be brushed or brushless, may be of various phase (see single-phase, two-phase, or three-phase
Read more

Read more about Centrifugal Compressor

Image
 Centrifugal Compressor is one of the types of compressors. In this post, we talked about how it works, its types, and comparing it with several other compressors. The radial compressor is also called a centrifugal compressor. This kind of dynamic compressor has a radial design. They operate at constant pressure and any changes in the external conditions will affect the performance of these compressors. Centrifugal compressors, sometimes called radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. They achieve a pressure rise by adding kinetic energy/velocity to a continuous flow of fluid through the rotor or impeller.   Types of  Centrifugal Compressor Multi-Stage Compressor Multi-stage compressors are among different types of centrifugal compressors. As the name suggests, this compressor has been designed to pass the gas through multiple stages for diverse purposes. Multi-stage compressors are used when a single-stage compressor can’t keep up with
Read more

Review and introduction of different parts of control valves

Image
 Control valves are one of the applications in home and industrial applications. We have talked about it in previous articles. In this article, in addition to an overview of its use, we want to introduce Control Valve Parts . Stay with us. What is Control Valve? A control valve is a valve used to control fluid flow by varying the size of the flow passage as directed by a signal from a controller.This enables the direct control of flow rate and the consequential control of process quantities such as pressure, temperature, and liquid level. In automatic control terminology, a control valve is termed a "final control element". Bad fuel can cause key engine parts, such as the injection control unit, fuel pressure control valve, fuel oil pump or cylinder liners and piston rings to go from new to unusable in no time.  Read more The main purposes of control valves: Relieving the system from specific pressures Controlling the flow direction Increasing or decrease the flow Parts of co
Read more