Introducing Disc Insulator and Shackle Insulator and their applications

 What is Disc InsulatorThere are two types of insulators: Disc Insulator and Shackle Insulator. In this article, we intend to introduce these two and examine their applications. Stay with us.

What is Disc Insulator?

As the name suggests, the type of insulator with a disk-shaped geometry is called disk insulators. These insulators are utilized in the transmission of electric power and distribution systems. There are many designs for these insulators, mainly based on customer requirements.We see many electrical overhead systems outside. All of them have different electrical components, same as an insulator, conductor, and electrical pole or tower. Read More in Linquip

What is Shackle Insulator?

Engineers used shackle insulators rather than strain insulators in the earlier days. But in current years, they are commonly used for low voltage distribution systems. We can utilize these insulators in both vertical or horizontal position. They can be attached to the pole with a bolt or to the cross arm directly.In early days, the shackle insulators were used as strain insulators. But nowaday, they are frequently used for low voltage distribution lines. Such insulators can be used either in a horizontal position or in a vertical position. They can be directly fixed to the pole with a bolt or to the cross arm. Read More in Linquip

Refrences:

https://www.linquip.com/blog/what-is-disc-insulator/

https://en.wikipedia.org/wiki/Insulator_(electricity)

https://www.linquip.com/blog/what-is-shackle-insulator/

https://www.gm.com/

https://www.wartsila.com/

Comments

Post a Comment

Popular posts from this blog

Introduction of electric motors and types

Image
  You've probably heard of electric motors by now. A critical piece in all electrical appliances. In this article, we will introduce electric motors in detail and examine its types, so stay tuned. An electric motor is a component that converts electrical energy into kinetic energy. Most electric motors are  electromagnetic -based. Most electric motors are rotary, but there are also linear motors. In a rotating motor, the moving part (usually inside the engine) is called the impeller or rotor, and the fixed position is called the station or stator. The motor consists of electric magnets wound on a frame. Although this frame is often referred to as armature, the term is often misused. Types of Electric Motor Electric motors may be classified by considerations such as power source type, internal construction, application and type of motion output. In addition to AC versus DC types, motors may be brushed or brushless, may be of various phase (see single-phase, two-phase, or three-...
Read more

Introduction and review of Suspension Insulators and Strain Insulators

Image
  In this article, we will have a detailed explanation and review of Suspension Insulators and Strain Insulators. Join us and read this article. First, we will introduce Suspension Insulators, and after reviewing it, we will submit Strain Insulators What is Suspension Insulators  ? The suspension type insulator consists of several insulation parts connected in series and forms a string. In suspension insulators, each porcelain discs is designed to work at 11 kV, and as the operating voltage increases, the number of discs in the string and in series increases as well. For example, the number of insulator discs required is 12 in 132 KV transmission lines.  Read More in Linquip What is Strain Insulators  ? According to  Wikipedia , A strain insulator is an electrical insulator designed to work in mechanical voltage (strain) to withstand the pull of a suspended electrical wire or cable. They are used in overhead electrical wiring to support radio...
Read more

Everything you should know about HVAC

Image
What is HVAC? What do you know about it? What is its use? In this article, we will take a closer look at HVAC, so join us to get the answers to these questions and any other questions about HVAC. The importance of HVAC Heating, ventilation, and air conditioning (HVAC) is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality. HVAC system design is a subdiscipline of  mechanical engineering , based on the principles of thermodynamics, fluid mechanics and heat transfer. As was mentioned earlier, an  HVAC system  is intended for thermal control of areas as well as comfort for occupants. Temperature is factor that affects the performance and health status of many systems. Take the case of a server room temperature as an example for which high temperature adversely affects the system’s reliability and operation of the servers is a great source of heat ge...
Read more